3-way Add-on Indoor Antenna Kit

The add-on internal cellular antenna kit allows you to add a second and third internal antenna, compatible with many of our repeater systems. The kit comes with a 2 ft. coaxial jumper cable to feed the signal from the amp into the splitters. Three internal antennas can then be connected to the splitter via coaxial cable: one of these antennas is in your original repeater system and two are included in this add-on kit.

There are 2 splitters in this kit - a 75%/25% splitter and a 50%/50% splitter. By placing these in different orders you can obtain different signal strengths going into the 3 amplifiers:

50:50 splitter connected to the 75 tap from the 75:25 splitter:
Signal is split 37.5%, 37.5% and 25% over the internal antennas. Use if the areas you have to cover are roughly similar in size. Connect the strongest signals to the longest cable runs.
50:50 splitter connected to the 25 tap from the 75:25 splitter:
Signal is split 75%, 12.5%, 12.5% over the 3 internal antennas. Use if you have one large and 2 smaller areas to cover (e.g. a warehouse and 2 office areas).
75:25 splitter connected to the 50:50 splitter:
Signal is split 50%, 37.5%, 12.5% over the 3 internal antennas. Use if you have 3 different sized areas to cover.

Having three internal antennas is useful in many situations e.g. if you wish to cover three rooms (and the walls are too thick to let signal through) or if you would like to cover three floors.

Kit contents
Wilson 859957 Dual Band Splitter (50:50)
Wilson 859906 Dual Band Splitter (75:25)
2x Wilson 301121 internal antennas (options available)
3x coaxial cable (options available)