Just announced, Wilson 805165 Tri-band Amplifier for Verizon 4G LTE!

Due to extremely high demand, Wilson Electronics has just announced their very first amplifier to support 4G LTE as well as the standard dual band frequencies, the 805165 tri-band amplifier for Verizon 4G LTE! Currently, there isn’t a single cellular booster system to boost both 4G LTE and 3G data/voice. However, with the 805165 that will soon be remedied. Operating on the standard dual band frequencies that’ll support 3G data and voice for the more popular carriers such as Verizon, AT&T, and Sprint, the 805165 will also massively increase data speeds on Verizon’s blazing fast 4G LTE network. The 805165 features a stunning dB gain of 70, which translates to coverage of up to 10,000 sq ft of area with improved wireless signal.

How does it work?

The outside antenna is placed in the area of best signal, collects it and sends it through a cable to the 805165 amplifier. The amplifier then boosts the 4G LTE, 3G and voice signal, and then sends the boosted signal through a cable to the inside antenna. This provides an area of improved signal that can be used by phones and data cards simultaneously.


The Wilson 805165 will cover the following:

  • Voice on all US networks except Nextel (i.e. AT&T, Sprint, Verizon, T-mobile, US Cellular, Cricket, MetroPCS etc)
  • 3G on all US networks except T-mobile and Nextel
  • 4G on Verizon

Technical Specifications

Product Reference 805165 Tri-Band 3G/4G Amplifier
Product Manual Wilson 801865 product manual
Frequency: Verizon 4G LTE 700MHz Band
Uplink: 776-787 MHz
Downlink: 746-757 MHz

US 800/850MHz Band
Uplink: 824-849 MHz
Downlink: 869-894 MHz

US 1900MHz Band
Uplink: 1850-1910 MHz
Downlink: 1930-1990 MHz

Gain: 70dB typical, 77dB maximum
Maximum linear output power: 25.1dBm (downlink), 29.4dBm (uplink)
Impedance 50 Ohm outside and inside
Oscillation Control: 20-70dB Amplifier Automatic Gain Control (AGC)
2db gain steps
Automatic shutdown on overload
Noise Figure (down): 3.5dB Nominal
Isolation: > 90dB
Power Consumption: 6V, 1.5A – 3.0A
Connectors: N/Female
Dimensions: 8.875″ x 6.0″ x 1.5″
Weight: 2.8 lbs


  • Steve Bridge says...

    Please notify me regarding price and availability

    On September 22, 2015

Leave a comment