The Cel-Fi GO RED FirstNet booster provides reliable cellular coverage in buildings for first responders. Emergency communications from fire, police, and medical personnel are provided with coverage.
The Cel-Fi GO RED boosts FirstNet Band 12 and Band 14. It is guaranteed Network Safe. It offers up to 15,000 sq ft of coverage with up to 100dB maximum gain. A wide range of antenna configurations can support any type of building size, building materials, and wall placement.
The GO RED has a NEMA 4 Indoor/Outdoor rated enclosure and NEMA 4 rated power plugs and jacks. Mounting hardware is included.
Note: The Cel-Fi GO RED is a stationary amplifier and does not support a "mobile mode" to enable its use while moving, unlike the Cel-Fi GO X (for AT&T, T-Mobile, Verizon).
What is FirstNet?
FirstNet is a new network being rolled out for emergency communications. Not all areas and buildings have good cellular signal, due to building materials or remote locations. Remote Communication Kits are now a standard tool for emergency service personnel. FirstNet is a high-speed, nationwide wireless broadband network with dedicated bands for public safety agencies and first responders.
Where buildings are transitioning to FirstNet, the Cel-Fi GO RED can work alongside existing legacy equipment, to ensure FirstNet service is available at the point of transition.
GO RED vs QUATRA 1000 FN vs QUATRA RED
Cel-Fi has a number of options for providing improved coverage for FirstNet and ERRCS. All of Cel-Fi's systems offer 100 dB of gain.
There are a few main differences between each of these options:
- The Cel-Fi GO RED is a consumer or commercial grade signal booster, designed for deployments to provide improved FirstNet coverage in buildings up to 15,000 sq ft.
- The Cel-Fi QUATRA 1000 FN is a commercial or enterprise grade "Hybrid DAS" that can provide coverage up to 200,000 sq ft. If you need to FirstNet coverage in a large building, the QUATRA 1000 FN is the right system for the job.
-
The Cel-Fi QUATRA RED is a similar booster to the 1000 FN, but supports all ERRCS frequencies, and is a full-scale public safety DAS for NFPA/ICF requirements, as well as FirstNet.
If you're unsure about which system is best suited to your needs, feel free to reach out to our team of signal specialists.
Warranty
Cel-Fi warranties all of their amplifiers, antennas, and RF components for 2 years against any workmanship or material defects.
Read more about Cel-Fi’s warranty policy here.
This product
can expose you to chemicals including Nickel, which is known to the State of California to
cause cancer, and Bisphenol A, which is known to the State of California to cause birth
defects or other reproductive harm. For more information go to
